The Diesel Truck Site  

Go Back   The Diesel Truck Site > Diesel Truck Forums > Dodge Cummins Forum

Dodge Cummins Forum Dodge Cummins Forum


Reply
 
Thread Tools Display Modes
  #1  
Old 12-03-2010, 08:00 PM
stodg73's Avatar
stodg73 stodg73 is offline
Out There, Savin' Lives
 
Join Date: Nov 2010
Location: Southern Colorado
Posts: 2,311
Default Gauges, What type do you have.

What type of gauges do you have?

I have Glow Shift gauges. I have the 3 in 1 and 2 temp gauges. These are
mounted on the A pillar. With the 3 in 1, I had to modify the center mount
to 2 3/8" diameter. The 3 in 1, has Boost, EGT, and Fuel Pressure. The
other 2 are Blue Digital gauges. The only problem is seeing the readout's in
broad daylight because of the tinted llenses.


Post up what you have or want.

Likes and dislikes.

How and where they were mounted.

What you would like to have.
__________________
O.O., 01.5, Dodge, 2500, High Output (H.O.) Cummins Turbo Diesel (245/505), Quad Cab Long Bed (QCLB), 4x4, Sport, Original Bosch VP 44 Injection Pump, 6 Speed/NV5600 Transmission, 3.55 Gears, 105k, currently stock engine, Fram Air Filter, 285/75R16s, Glow Shift Gauges: Fuel Pressure (FP), Boost, Exhaust Gas Temperature (EGT), Oil Temperature, SMARTY@1, Airtex lift pump 19 psi @ idle, 14 psi @ WOT, Propane Injection, 2 Stroke Oil, Intake Air Temperature (IAT) Fooler = Better MPG, Bed Lined, Chrome Nerf Bars, more to come!!

Toys:
'79 CJ5, 258ci, 3" lift, 33x12.50x15, Stock Engine and 3 Speed Tranny
'05 Suzuki, GSX1300R, Hayabusa, All Stock, #3('00 blown engine, '00 stolen, & '05)
The complete live & learn and pass it on by H. Jackson Brown, Jr.

Last edited by stodg73; 12-03-2010 at 08:06 PM.
Reply With Quote
  #2  
Old 12-03-2010, 08:52 PM
MnTom's Avatar
MnTom MnTom is offline
Administrator
 
Join Date: Nov 2010
Location: Near Duluth, Mn
Posts: 4,901
Default

I have 3 Di Pricol gauges on the A pillar. Top one is tranny temp, middle is pyro, and bottom is boost. They are in a good location to see for a driver, but they sure do make the A pillar a lot harder to see around.
__________________
1996 RAM "Custom Ground" 100 plate 3/4 forward, 300 injectors, 16.5 timing, Goerends Auto = 365HP, 833TQ Third Gen Rims, Aluminum Headache Rack
Duct Tape can't fix stupid, BUT it can muffle the sound
Reply With Quote
  #3  
Old 12-27-2010, 06:36 PM
DieselDrew24's Avatar
DieselDrew24 DieselDrew24 is offline
Puff Puff
 
Join Date: Dec 2010
Location: Pueblo, Colorado
Posts: 62
Default

running autometer on the pillar i will post pix later tonight....fuel pressure on the dash with pyro, trans temp, and boost
__________________
'02 "Carrie" 4x4 Auto, 6in straight pipe TBE, Autometer Gauges, AFe Stage II CAI w/ Torque Tube, ATS Intake Manifold, ATS Aurora 3k, AirDog150, Smarty, Edge Comp "HOT", BD Stealth Cover, ATS DYNO on 8/6/2011 = 447hp 970ft-lbs
Reply With Quote
  #4  
Old 12-27-2010, 11:48 PM
bobcat67's Avatar
bobcat67 bobcat67 is offline
Member
 
Join Date: Dec 2010
Location: Bozeman, MT
Posts: 19
Default

I have 3 Di Pricol Optix gauges in mine right now, don't like em at all cause I don't think they're in business anymore and I want to get 3 more gauges and now I'm gonna have to buy 6 new gauges because I can't have non matching, just not my style, the 3 I have right now are on the A-Pillar and are Boost, EGT, Trans temp-gotta watch that fully billet Goerend, but the next 3 will go in a pod above the rearview mirror, and will be Oil Pressure, back Pressure, and Rail Pressure, and I probably will have to get 2 more put on the steering column for the other boost gauge and fuel pressure gauge, all going to be ISSPRO I think, should be able to monitor almost everything, plus I always have 2 little cubby holes that seem to fit gauges pretty well
__________________
2006 Dodge Ram 2500, to many mods to list, in the process of obtaining 7.0L from a 5.9L block, crazy maybe, possible, yes
Reply With Quote
  #5  
Old 12-28-2010, 12:26 AM
DieselDrew24's Avatar
DieselDrew24 DieselDrew24 is offline
Puff Puff
 
Join Date: Dec 2010
Location: Pueblo, Colorado
Posts: 62
Default

cummins 7.jpg

cummins 6.jpg

sorry they come out small.....click them and they will expand out.....night and day views
__________________
'02 "Carrie" 4x4 Auto, 6in straight pipe TBE, Autometer Gauges, AFe Stage II CAI w/ Torque Tube, ATS Intake Manifold, ATS Aurora 3k, AirDog150, Smarty, Edge Comp "HOT", BD Stealth Cover, ATS DYNO on 8/6/2011 = 447hp 970ft-lbs
Reply With Quote
  #6  
Old 12-28-2010, 08:42 AM
MnTom's Avatar
MnTom MnTom is offline
Administrator
 
Join Date: Nov 2010
Location: Near Duluth, Mn
Posts: 4,901
Default

Man Bobcat, your truck is gonna look like an airplane cockpit with all the gauges!!
__________________
1996 RAM "Custom Ground" 100 plate 3/4 forward, 300 injectors, 16.5 timing, Goerends Auto = 365HP, 833TQ Third Gen Rims, Aluminum Headache Rack
Duct Tape can't fix stupid, BUT it can muffle the sound
Reply With Quote
  #7  
Old 12-28-2010, 09:26 AM
bobcat67's Avatar
bobcat67 bobcat67 is offline
Member
 
Join Date: Dec 2010
Location: Bozeman, MT
Posts: 19
Default

it won't be driven to much when all that happens, but it'll look sweet, gonna take a master electrician to do it right though lol, and that is not me
__________________
2006 Dodge Ram 2500, to many mods to list, in the process of obtaining 7.0L from a 5.9L block, crazy maybe, possible, yes
Reply With Quote
  #8  
Old 01-01-2011, 10:25 PM
Mopar1973Man's Avatar
Mopar1973Man Mopar1973Man is offline
Senior Member
 
Join Date: Nov 2010
Location: New Meadows, Idaho
Posts: 902
Default

The last of the line for DiPricols...

Attached Images
File Type: jpg DSCF3741.jpg (87.3 KB, 45 views)
__________________
Michael Nelson - AKA: Mopar1973Man - Forum & Articles
2002 Dodge Ram 2500, 5.9L Cummins Turbo Diesel, 5 Speed NV4500 transmission, 4x4, 3.55 Gears, AirDog 150 fuel pump with 1/2" Big Line Kit, Stock Bosch VP44 Injection Pump, Bosch RV275 Injectors +40HP, Edge Comp Performance Box, BHAF (Big Honkin' Air Filter), Stock Holset HX35W Turbo, Straight 3" Pipe Exhaust, Crankcase Vent Mod, High Idle Mod, MPG / IAT fooler Mod, ScanGauge II, 25% Tinted Windows, DiPricol Gauges (Fuel pressure, Boost, Pyrometer), 235/85 R16 tires mounted on 16x7 Aluminum mags (weighing 62#), Custom Fog Lights, Custom Backup lights, Silverstar Headlights, 23-24 MPG

1996 Dodge Ram 1500, 5.9L Magnum V8 Gasoline Engine, 46RE Automatic Transmission, 4WD with CAD axle with 3.55 Gears, Mopar Performance PCM, Gutted Kitty, ScanGauge II, 35% Tinted Windows, 16-17 MPG

Reply With Quote
  #9  
Old 01-02-2011, 12:28 AM
dknaks's Avatar
dknaks dknaks is offline
**childish comment here**
 
Join Date: Dec 2010
Posts: 168
Default

Got ISSPro EGT (post turbo), Boost, and Trans Temp on the A-Pillar. Been real happy with them, they are kind of backups since my Edge J/A does most of the monitoring.



Got the trans temp in place of the fuel pressure now (since the edge monitors that).

__________________
-Dustin
07 6.7 3500 dually, Blackmaxx, SB DD3600. Fully deleted.

Last edited by dknaks; 01-02-2011 at 12:31 AM.
Reply With Quote
  #10  
Old 01-02-2011, 10:06 AM
MnTom's Avatar
MnTom MnTom is offline
Administrator
 
Join Date: Nov 2010
Location: Near Duluth, Mn
Posts: 4,901
Default

I like the way yours look at night Dustin! Are those warning lights for when the needle gets too high?
__________________
1996 RAM "Custom Ground" 100 plate 3/4 forward, 300 injectors, 16.5 timing, Goerends Auto = 365HP, 833TQ Third Gen Rims, Aluminum Headache Rack
Duct Tape can't fix stupid, BUT it can muffle the sound
Reply With Quote
Reply

Bookmarks

Tags
autometer, di pricol, gauges, glowshift, isspro

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:51 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Skin & Style Created By: Mopar1973Man.Com
Copyright 2012 Diesel Truck Site